
Network OS Message Reference 177
53-1003227-01
FABS-1005
8
FABS-1005
Message <Function name and description of problem> (<ID type>= <ID number>).
Message Type LOG
Severity WARNING
Probable Cause Indicates that an unsupported operation has been requested. This is usually an internal Network OS
problem or file corruption. The following is the possible value for the function name and description of
problem variable:
fabsys_write: Unsupported write operation: process xxx
The xxx value is the process ID (PID), which could be any whole number.
Recommended
Action
Reload or power cycle the active management module (for modular systems) or the switch (for compact
systems).
If the message persists, execute the firmware download command to update the firmware.
FABS-1006
Message <Function name and description of problem>: object <object type id> unit <slot>.
Message Type LOG
Severity WARNING
Probable Cause Indicates that there is no device in the slot with the specified object type ID in the system module record.
This could indicate a serious Network OS data problem on the switch. The following are the possible
values for the function name and description of problem variable:
• setSoftState: bad object
• setSoftState: invalid type or unit
• media_sync: Media oid mapping failed
• fabsys_media_i2c_op: Media oid mapping failed
• fabsys_media_i2c_op: obj is not media type
• media_class_hndlr: failed sending media state to blade driver
Recommended
Action
If the message is isolated, monitor the error messages on the switch. If the error is repetitive or if the
fabric failed, fail over or reload the switch.
If the message persists, execute the firmware download command to update the firmware.
Komentarze do niniejszej Instrukcji