Brocade Multi-Service IronWare Switching Configuration Gui Instrukcja Użytkownika Pobierz pdf (Strona 518)

100

101

488 Multi-Service IronWare Switching Configuration Guide

53-1003036-02

Configuring MRP

Changing the hello and preforwarding times

You can also change the RHP hello time and preforwarding time. To do so, enter commands such

as the following.

Brocade(config-vlan-2-mrp-1)# hello-time 200

Brocade(config-vlan-2-mrp-1)# preforwarding-time 400

These commands change the hello time to 200 ms and change the preforwarding time to 400 ms.

Syntax: [no] hello-time ms

Syntax: [no] preforwarding-time ms

The ms specifies the number of milliseconds.

The hello time can be from 100 – 1000 (one second). The default hello time is 100 ms.

The preforwarding time can be from 200 – 5000 ms, and must be at least twice the value of the

hello time and must be a multiple of the hello time. The default preforwarding time is 300 ms.

A change to the hello time or preforwarding time takes effect as soon as you enter the command.

NOTE

You can use MRP ring diagnostics to determine whether you need to change the hello time and

preforwarding time. Refer to “Using MRP diagnostics”.

Changing the scale timer

You are able to decrease MRP convergence time by changing the MRP scale timer tick from 100 ms

to 50 ms. To do so, enter the following command:

Brocade(config)# scale-timer mrp

Syntax: [no] scale-timer mrp

Note: This command accepts no values and is put in place as it is shown above.

Note: Changing the scale timer affects the operation of MRP. Refer to “Tuning MRP timers” for

further information.

1 2 ... 513 514 515 516 517 518 519 520 521 522 523 ... 983 984

Komentarze do niniejszej Instrukcji

Brak uwag

Brocade Multi-Service IronWare Switching Configuration Gui Instrukcja Użytkownika Strona 518

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Akcesoria komputerowe Brocade Multi-Service IronWare Switching Configuration Gui