Brocade DCX 8510-8 Backbone Hardware Reference Manual Instrukcja Użytkownika Pobierz pdf (Strona 129)

System FRU weights (Continued)TABLE 20

FRU Weight

FC8-64 port blade 3.36 kg (7.4 lb) without media

FC16-32 port blade 2.8 kg (6.2 lb) without media

FC16-48 port blade 3.3 kg (7.3 lb) without media

FC16-64 port blade 3.56 kg (7.85 lb) without media

FCOE10-24 FCoE blade 3.72 kg (8.2 lb) without media

FS8-18 encryption blade 5.5 kg (12.0 lb) without media

FX8-24 extension blade 4.2 kg (9.2 lb) without media

Port card filler panel 1.5 kg (3.2 lb)

Power supply 2.45 kg (5.4 lb)

Blower assembly 5.73 kg (12.6 lb)

WWN bezel 0.3 kg (0.6 lb)

Cable management device 0.45 kg (1.0 lb)

Chassis door 2.09 kg (4.6 lb)

Facility requirements

The facility where the Brocade DCX 8510-8 is in use must meet the following requirements to provide

for correct operation:

• Adequate supply circuit, line fusing, and wire size, as specified by the electrical rating on the chassis

nameplate.

• The environmental specifications listed in Environmental requirements on page 130.

• The power specifications listed in Power specifications on page 131.

Furthermore, if the Brocade DCX 8510-8 will be installed in an EIA rack, ensure the following:

• All equipment installed in the rack has a reliable branch circuit ground connection, and does not rely

on a connection to a branch circuit, such as a power strip.

• The rack is balanced and mechanically secured to provide stability in the event of an earthquake.

• Additional equipment does not exceed the rack’s weight limits.

Facility requirements

Brocade DCX 8510-8 Backbone Hardware Reference Manual 129

53-1002180-07

1 2 ... 124 125 126 127 128 129 130 131 132 133 134 ... 177 178

Brak uwag

Brocade DCX 8510-8 Backbone Hardware Reference Manual Instrukcja Użytkownika Strona 129