Brocade DCX 8510-8 Backbone Hardware Reference Manual Instrukcja Użytkownika Pobierz pdf (Strona 118)

6. Replace the port blades or filler panels (Port, application, and encryption blade removal and

replacement on page 76 and Blade filler panel removal and replacement on page 80).

7. Replace the cable management comb (Cable management comb removal and replacement on

page 75).

8. Connect the power cords to the power supplies and the power outlets.

9. Replace the chassis door (Chassis door removal and replacement on page 74).

10.Power on the Brocade DCX 8510-8 (Installing components into the new chassis).

The Brocade DCX 8510-8 performs a power-on self-test (POST). The POST takes a minimum of

three minutes and is complete when LED activity returns to the standard state.

11.Verify that the Brocade DCX 8510-8 is powered on and POST is complete (all power LED indicators

on the blades should be a steady green).

12.Verify that all components are functioning correctly by checking their LEDs. If the LEDs do not

indicate correct operation, try reinstalling the corresponding component.

Downloading the configuration

Once the chassis and its various components have been reassembled and powered back on, use the

configDownload command to restore the original configuration. The configDownload command can

be entered through a Telnet or serial session, but the Brocade DCX 8510-8 must have an Ethernet

connection to the server name or IP address of the host for the download process to complete. For

more information, refer to the help configdownload command or the Fabric OS Command

Reference.

Complete the following steps to download the configuration.

1. Log in to the Brocade DCX 8510-8 as admin.

switch:admin> login

password: xxxxxxxx

switch:admin>

NOTE

If you are using the Virtual Fabric feature, you must run configdownload -vfbefore running the

configdownload command to restore the logical switch configuration.

2. Enter the chassisDisable command.

3. Enter the configDownload command.

switch:admin> configdownload -all

Server Name or IP Address [host]: 123.123.123.123

User Name [None]: Admin24

File Name [config.txt]: config-switch.txt

Password: xxxxxxxx

download complete

switch:admin>

4. Reboot the Brocade DCX 8510-8.

Verifying correct operation of system

Complete the following steps to verify the correct operation of the Brocade DCX 8510-8.

1. Log in to the Brocade DCX 8510-8 as admin.

switch:admin> login

Downloading the configuration

118 Brocade DCX 8510-8 Backbone Hardware Reference Manual

53-1002180-07

1 2 ... 113 114 115 116 117 118 119 120 121 122 123 ... 177 178

Komentarze do niniejszej Instrukcji

Brak uwag

Brocade DCX 8510-8 Backbone Hardware Reference Manual Instrukcja Użytkownika Strona 118

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Akcesoria komputerowe Brocade DCX 8510-8 Backbone Hardware Reference Manual