Brocade Network Advisor SAN + IP User Manual v12.3.0 Instrukcja Użytkownika Pobierz pdf (Strona 144)

74 Brocade Network Advisor SAN + IP User Manual

53-1003155-01

IP SNMP credentials

Adding SNMPv3 credentials

To add SNMPv3 read-write credentials, complete the following steps.

1. Select Discover > IP Products.

The Discover Setup - IP dialog box displays.

2. Click the Global Settings tab.

3. Click the SNMP tab.

FIGURE 19 SNMPv3 credentials

4. Enter a unique label to identify the credentials in the Display Label field of the Add/Edit

SNMPv3 Read-Write Credentials area.

This label can be from 1 through 16 characters long, case sensitive, and allows all printable

ASCII characters.

5. Enter the SNMPv3 user name in the User ID field.

The user name can be from 1 through 16 characters long, case sensitive, and allows all

printable ASCII characters.

6. Select one of the following protocols from the Authentication Protocol list:

• None

• HMAC_MD5

• HMAC_SHA

7. Enter the SNMPv3 authentication password in the Authentication Password field.

The password can be from 8 through 16 characters long, case sensitive, and allows all

printable ASCII characters. The password displays as asterisks.

8. Select one of the following protocols from the Privacy Protocol list:

• None

• CBC-DES

• CFB_AES-128

If you select a privacy protocol, the selected protocol encrypts the SNMP request and response

packets.

9. Enter the privacy password in the Privacy Password field.

1 2 ... 139 140 141 142 143 144 145 146 147 148 149 ... 269 270

Brak uwag

Brocade Network Advisor SAN + IP User Manual v12.3.0 Instrukcja Użytkownika Strona 144