Brocade Network OS NETCONF Operations Guide v4.1.1 Instrukcja Użytkownika Pobierz pdf (Strona 560)

100

101

528 Network OS NETCONF Operations Guide

53-1003231-02

Performing basic OSPF configuration

<rbridge-id>101</rbridge-id>

<area>

<area-id>1.1.1.1</area-id>

<nssa>

<nssa-value>10</nssa-value>

</metric>

</nssa>

</area>

<summary-address>

<sum-address>209.157.1.0</sum-address>

<sum-address-mask>255.255.255.0</sum-address-mask>

</summary-address>

</ospf>

</router>

</rbridge-id>

</config>

</edit-config>

</rpc>

<rpc-reply message-id="2607" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">

<ok/>

</rpc-reply>

Assigning an area range (optional)

You can assign a range for an area, but it is not required. Ranges allow a specific IP address and

mask to represent a range of IP addresses within an area, so that only that reference range

address is advertised to the network, instead of all the addresses within that range. Each area can

have up to 32 range addresses.

If you do assign a range for an area, you must also specify a range effect, which can be “advertise”

or “not-advertise”.

The following example RPC defines an area range for subnets on 0.0.0.10 and 0.0.0.20.

<edit-config>

</target>

<rbridge-id xmlns="urn:brocade.com:mgmt:brocade-rbridge">

<rbridge-id>101</rbridge-id>

<area>

<area-id>0.0.0.10</area-id>

<range>

<range-address>193.45.0.0</range-address>

<range-mask>255.255.0.0</range-mask>

<range-effect>not-advertise</range-effect>

</range>

</area>

<area>

<area-id>0.0.0.20</area-id>

1 2 ... 555 556 557 558 559 560 561 562 563 564 565 ... 621 622

Komentarze do niniejszej Instrukcji

Brak uwag

Brocade Network OS NETCONF Operations Guide v4.1.1 Instrukcja Użytkownika Strona 560

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Akcesoria komputerowe Brocade Network OS NETCONF Operations Guide v4.1.1