Brocade FastIron Ethernet Switch Software Upgrade Guide Instrukcja Użytkownika Pobierz pdf (Strona 26)

Modified PIM commands (Continued)TABLE 21

FastIron 08.0.xx FastIron 07.4.00 Note

[no] message-interval

seconds

default: 60 secs

allowed range: [10 - 65535]

secs

[no] message-interval

seconds

default: 60 secs

allowed range: [1 - 65535]

secs

Configures PIM prune wait timer. The allowed

range has been changed from [1-65535] seconds

to [10-65535] seconds.

[no] hardware-drop-

disable

[no] hardware-drop

Default: PMRI is enabled

Configures Passive Multicast Router Insertion

(PMRI). PMRI is enabled by default.

[no] rp-address address

[acl-num | acl-name]

[no] rp-address address

[std-acl-num [override]]

Configures static RP using ACL.

FastIron 07.4.00 supports only standard numbered

ACL, whereas in FastIron 08.0.xx, all ACLs

(standard, extended, numbered, and named) are

supported.

In FastIron 07.4.00, RP address learned from the

Bootstrap protocol takes precedence over static

RP, so override option was provided to give

precedence to static RP. In FastIron 08.0.xx,

static-RP takes precedence.

[no] rp-candidate

ethernet | ve | loopback

num

[no] rp-candidate

ethernet | ve | loopback

num [group-list std-acl-num]

Configures RP candidate using ACL.

In FastIron 07.4.00, ACLs can be used to limit RP

candidate for certain groups.

In FastIron 08.0.xx, this feature is not available.

So, RP candidate is for all the groups.

[no] system-max pim-

hw-mcache num

[no] system-max pim-

mcache num

Sets the maximum limit for the PIM mcache (flows)

that can be programmed in the hardware.

Interface level command

[no] ip pim [version] [no] ip pim [version]

Configures the PIM SM/DM version on particular

interface. PIM DM version 1 is not supported any

more. PIM-SM v2, PIM-DM v1, and PIM-DM v2 are

supported versions.

Deprecated PIM commands TABLE 22

Command Note

Global level command

[no] disable-pim

Disables the PIM operation without removing the PIM configuration.

[no] rp-address all

Removes all static RP configurations. In FastIron 08.0.xx, all static RP address

configuration have to be deleted individually.

Interface level command

Upgrade and downgrade considerations

24 FastIron Ethernet Switch Software Upgrade Guide

53-1003089-02

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 120 121

Komentarze do niniejszej Instrukcji

Brak uwag

Brocade FastIron Ethernet Switch Software Upgrade Guide Instrukcja Użytkownika Strona 26

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Akcesoria komputerowe Brocade FastIron Ethernet Switch Software Upgrade Guide