Brocade FastIron Ethernet Switch Security Configuration Gu Instrukcja Użytkownika Strona 214

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 396
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 213
device(config-if-e1000-1)#dot1x port-control auto
device(config-if-e1000-1)#exit
802.1X Authentication with dynamic VLAN assignment
The following figure illustrates 802.1X authentication with dynamic VLAN assignment. In this
configuration, two user PCs are connected to a hub, which is connected to port e2. Port e2 is
configured as a dual-mode port. Both PCs transmit untagged traffic. The profile for User 1 on the
RADIUS server specifies that User 1 PC should be dynamically assigned to VLAN 3. The RADIUS
profile for User 2 on the RADIUS server specifies that User 2 PC should be dynamically assigned to
VLAN 20.
FIGURE 8 Sample configuration using 802.1X authentication with dynamic VLAN assignment
In this example, the PVID for port e2 would be changed based on the first host to be successfully
authenticated. If User 1 is authenticated first, then the PVID for port e2 is changed to VLAN 3. If User
802.1X Authentication with dynamic VLAN assignment
214 FastIron Ethernet Switch Security Configuration Guide
53-1003088-03
Przeglądanie stron 213
1 2 ... 209 210 211 212 213 214 215 216 217 218 219 ... 395 396

Komentarze do niniejszej Instrukcji

Brak uwag